Cold rolled
Our cold-rolled sheet steels are available in a variety of qualities, surface finishes, strength levels and chemistries.
Cold-rolled sheet steel is produced from hot-rolled sheet with additional processing steps such as pickling, cold reduction, annealing and temper rolling to provide specific mechanical properties, surface finish, gauge tolerance and strip shape. The benefits of cold-rolled sheet is excellent performance in operations that require deep drawing and intricate bending and forming.
Cold-rolled is easy to weld and preparation of its uniform surface for application of finishes is simple and affordable. High-strength, cold-rolled sheet steels are used for weight reduction while increasing strength and durability that can result in cost reductions to customers.
This steel is used in appliance, automotive, electrical equipment, industrial containers and tubular products (mechanical and structural tubing).
We offer a wide range of precisely controlled chemical compositions with low residuals. Product attributes, additional offerings and capabilities include:
Surface treatments
Dry, oiled or prelube
Ni-flash surface treatment
Temper rolled or tension leveled
Exposed quality
Matte finish is standard
Embossed/textured
Continuous annealing line
Clean surface for easy cleaning and paint adherence
Consistent properties for improved press productivity
Rapid processing for reduced lead times
In-line temper and tension level capabilities
AHSS, UHSS, Gen 3 products available
Batch annealing
Extended annealing cycle for enhanced formability
CDML
Gauge | Width |
0.018" - 0.088" (0.46 - 2.23 mm) | 30 - 73" (762 - 1854 mm) |
Size capability may vary by specification and facility. Please contact our sales department for specific information.
Agency spec or type | Grade |
ASTM A1008 | Mild CS, DS, DDS, EDDS, SS 30 - 50ksi (210 - 345MPa), HSLA 40 - 60ksi (280 - 420MPa) |
SAE J403 | C1004 – C1008, C1010 – C1022 |
JIS G3141 | SPCC, SPCCT, SPCD, SPCE, SPCF, SPCG |
EN 10130 | DC01-DC07 |
SAE J2329 | CR1, CR2, CR3, CR4, CR5 |
JIS G3135 | SPFC 340 – 440 |
Enameling steels | ASTM A424 Enameling Steel Type 3 |
Specified hardness | 40-85 Rb ¼, ½, full hard |
Bake hardenable steels | 180 – 300 BH |
AHSS | DP590-DP1180, 1180HF |
AHSS/USS developmental | Fortiform®S 1470 (1470HSHF), 980T700Y-MP, 980T800Y-CP, MP1300, MP1500, DP500 |
CRML | Inquire |
Press hardened steels | 22MnB5 |